Evolve EVS Guía para resolver problemas descargar pdf (Pagina 28)

MANUAL REGENERATION

NOTE: For softeners, if

brine tank does not contain

salt, fill with salt and wait

at least two hours before

regeneration. If you need

to initiate a manual regeneration, either

immediately, or the same night at the

preprogrammed time for regeneration (typically 2:00 AM),

complete the following steps.

For Immediate Regeneration:

Press and hold

REGEN until valve motor starts (typically 5 seconds).

For Regeneration the same night:

Press and release

REGEN (notice that flashing “REGEN TODAY” appears).

ERROR

If the display toggles between “Error”

and an error code (i.e. a number),

call a service technician and report

the error code.

BYPASS VALVE OPERATION

To shut off water to the system, position arrow handles as shown in

the bypass operation diagram below. If your valve doesn’t look like

the diagram below, contact your service technician for instructions

on how to shut off water.

NORMAL OPERATION BYPASS OPERATION

ADJUST HARDNESS, DAYS BETWEEN REGENERATION,

OR TIME OF REGENERATION

For initial set-up or to make adjustments,

please complete the steps as shown to

the right. Access this mode by pressing

NEXT and + button simultaneously.

NOTE: Hardness display shows “-nA-”

if used as a filter. If other displays do

not appear, refer to manual.

GENERAL OPERATION

When the system is operating, one of three displays will be shown:

time of day, gallons of treated water available, or gallons per

minute. Pressing

NEXT will toggle between the three choices.

TO SET TIME OF DAY

In the event of a prolonged power outage,

time of day flashes, indicating that this

needs to be reset. All other information will

be stored in memory no matter how long

the power outage. Please complete the

steps as shown to the right. To access this

mode, press

CLOCK.

1. Accessed by pressing

CLOCK

2. Adjust hours with + and — buttons,

AM/PM toggles at 12

3. Press NEXT

4. Adjust minutes with + and — buttons

5. Press

NEXT to complete and return to

normal operation

1. Accessed by pressing

NEXT and +

button simultaneously

2. Adjust hardness using + and — buttons

3. Press NEXT

4. Adjust days between regenerations

using + and — buttons

5. Press NEXT

6. Adjust time of regeneration hour with +

and — buttons, AM/PM toggles at 12

7. Press NEXT

8. Adjust time of regeneration minutes

with + and — buttons

9. Adjust backlight setting with + and

— buttons

10. Press

NEXT to complete and return

to normal operation

LIT-EV ES MAN ENVINK 1/14 250

QUICK REFERENCE GUIDE:

Manufactured exclusively for Evolve Series Dealers at:

1900 Prospect Court • Appleton, WI 54914

Phone: 920-739-9401 • Fax: 920-739-9406

1 2 ... 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Evolve EVS Guía para resolver problemas Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Dispensador De Agua Evolve EVS